The powerful T-DRILL T-65 SS is an ideal portable solution for making tee joints of 3/8-2 inch O.D. in main run tubes up to 4 inch O.D. in just a couple of minutes. While giving comparable quality to commercial tee fittings, the profit will increase since the T-65 SS eliminates cutting of pipe, two welded joints and the fitting cost. If tube polishing is required at the welding points, the T-65 SS also reduces that, as well as any inspection costs. The branch pipe can be connected to a formed outlet either by orbital welding or by manual welding. The ergonomically designed machine is easy and convenient to use, as it has two handles; the upper one for drilling through and the other one for pilot hole side movement. This minimizes the amount of force needed to perform and makes the collaring process highly effortless for the user. The T-65 SS is an excellent solution to be used both in construction and renovation project, as well as in the demanding field conditions in maintenance, repair work and the process industry. Branch Puller / Branch Pulling Device

Read more less

ND-54 Tube End Notcher is used for cutting and dimpling the branched tube ends to enable the best possible flow characteristics. The ND-54 is a natural complement to the T-DRILL tee forming system. It cuts a half-moon shaped coupon from each side of the branch tube to provide for full flow and simultaneously presses in a dimple that rests on the rim of the tee and acts as a depth stop. A second dimple 6 mm higher acts as a point of inspection. The result is an inspectable brazed joint with the best possible flow characteristics. For branch tube sizes 12, 14-16, 18, 22, 28, 35, 42 and 54 mm and for corresponding inch sizes: ½, ¾, 1, 1 ¼, 1 ½, 2 inch. SPECIAL ORDER Branch Puller / Branch Pulling Device

Read more less

Copper T-D Collaring Head 19 mm (3/4in) Collaring Heads Purchased Separately T-drill portable pipe branching system provides increased strength and improved flow characteristics when compared to standard tee fittings. It also increases profits due to fewer welded joints, no tee fitting costs and improved productivity.   Code Description Size TD5310400 T-DRILL COLLARING HEAD 1/2" TD5310464 T-DRILL COLLARING HEAD 3/4" TD5310405 T-DRILL COLLARING HEAD 1" TD5310414 T-DRILL COLLARING HEAD 1 1/4" TD5310412 T-DRILL COLLARING HEAD 1 1/2" TD5310413 T-DRILL COLLARING HEAD 2"   Refigeration sizes also available Branch Puller / Branch Pulling Device

Read more less

Copper T-D Collaring Head 32 mm (1 1/4in) Collaring Heads Purchased Separately T-drill portable pipe branching system provides increased strength and improved flow characteristics when compared to standard tee fittings. It also increases profits due to fewer welded joints, no tee fitting costs and improved productivity.   Code Description Size TD5310400 T-DRILL COLLARING HEAD 1/2" TD5310464 T-DRILL COLLARING HEAD 3/4" TD5310405 T-DRILL COLLARING HEAD 1" TD5310414 T-DRILL COLLARING HEAD 1 1/4" TD5310412 T-DRILL COLLARING HEAD 1 1/2" TD5310413 T-DRILL COLLARING HEAD 2"   Refigeration sizes also available Branch Puller / Branch Pulling Device

Read more less

Copper T-D Collaring Head 50 mm (2in) (for T-60 only) Also Adjustable to suit 54 mm (2 1/8in) Collaring Heads Purchased Separately T-drill portable pipe branching system provides increased strength and improved flow characteristics when compared to standard tee fittings. It also increases profits due to fewer welded joints, no tee fitting costs and improved productivity.   Code Description Size TD5310400 T-DRILL COLLARING HEAD 1/2" TD5310464 T-DRILL COLLARING HEAD 3/4" TD5310405 T-DRILL COLLARING HEAD 1" TD5310414 T-DRILL COLLARING HEAD 1 1/4" TD5310412 T-DRILL COLLARING HEAD 1 1/2" TD5310413 T-DRILL COLLARING HEAD 2"   Refigeration sizes also available Branch Puller / Branch Pulling Device

Read more less

Copper T-D Collaring Head 38 mm (1 1/2in) (for T-60 only) Also Adjustable to suit 42mm (1 5/8in) Collaring Heads Purchased Separately T-drill portable pipe branching system provides increased strength and improved flow characteristics when compared to standard tee fittings. It also increases profits due to fewer welded joints, no tee fitting costs and improved productivity.   Code Description Size TD5310400 T-DRILL COLLARING HEAD 1/2" TD5310464 T-DRILL COLLARING HEAD 3/4" TD5310405 T-DRILL COLLARING HEAD 1" TD5310414 T-DRILL COLLARING HEAD 1 1/4" TD5310412 T-DRILL COLLARING HEAD 1 1/2" TD5310413 T-DRILL COLLARING HEAD 2"   Refigeration sizes also available Branch Puller / Branch Pulling Device

Read more less

Copper T-D Collaring Head 35 mm (1 3/8in) Collaring Heads Purchased Separately T-drill portable pipe branching system provides increased strength and improved flow characteristics when compared to standard tee fittings. It also increases profits due to fewer welded joints, no tee fitting costs and improved productivity.   Code Description Size TD5310400 T-DRILL COLLARING HEAD 1/2" TD5310464 T-DRILL COLLARING HEAD 3/4" TD5310405 T-DRILL COLLARING HEAD 1" TD5310414 T-DRILL COLLARING HEAD 1 1/4" TD5310412 T-DRILL COLLARING HEAD 1 1/2" TD5310413 T-DRILL COLLARING HEAD 2"   Refigeration sizes also available Branch Puller / Branch Pulling Device

Read more less

Copper T-D Collaring Head 25 mm (1in) Collaring Heads Purchased Separately T-drill portable pipe branching system provides increased strength and improved flow characteristics when compared to standard tee fittings. It also increases profits due to fewer welded joints, no tee fitting costs and improved productivity.   Code Description Size TD5310400 T-DRILL COLLARING HEAD 1/2" TD5310464 T-DRILL COLLARING HEAD 3/4" TD5310405 T-DRILL COLLARING HEAD 1" TD5310414 T-DRILL COLLARING HEAD 1 1/4" TD5310412 T-DRILL COLLARING HEAD 1 1/2" TD5310413 T-DRILL COLLARING HEAD 2"   Refigeration sizes also available Branch Puller / Branch Pulling Device

Read more less

Copper T-D Collaring Head 28 mm (1 1/8in) Collaring Heads Purchased Separately T-drill portable pipe branching system provides increased strength and improved flow characteristics when compared to standard tee fittings. It also increases profits due to fewer welded joints, no tee fitting costs and improved productivity.   Code Description Size TD5310400 T-DRILL COLLARING HEAD 1/2" TD5310464 T-DRILL COLLARING HEAD 3/4" TD5310405 T-DRILL COLLARING HEAD 1" TD5310414 T-DRILL COLLARING HEAD 1 1/4" TD5310412 T-DRILL COLLARING HEAD 1 1/2" TD5310413 T-DRILL COLLARING HEAD 2"   Refigeration sizes also available Branch Puller / Branch Pulling Device

Read more less

Copper T-D Collaring Head 22 mm (7/8in) Collaring Heads Purchased Separately T-drill portable pipe branching system provides increased strength and improved flow characteristics when compared to standard tee fittings. It also increases profits due to fewer welded joints, no tee fitting costs and improved productivity.   Code Description Size TD5310400 T-DRILL COLLARING HEAD 1/2" TD5310464 T-DRILL COLLARING HEAD 3/4" TD5310405 T-DRILL COLLARING HEAD 1" TD5310414 T-DRILL COLLARING HEAD 1 1/4" TD5310412 T-DRILL COLLARING HEAD 1 1/2" TD5310413 T-DRILL COLLARING HEAD 2"   Refigeration sizes also available Branch Puller / Branch Pulling Device

Read more less

Copper T-D Collaring Head 15 mm (5/8in) Collaring Heads Purchased Separately T-drill portable pipe branching system provides increased strength and improved flow characteristics when compared to standard tee fittings. It also increases profits due to fewer welded joints, no tee fitting costs and improved productivity.   Code Description Size TD5310400 T-DRILL COLLARING HEAD 1/2" TD5310464 T-DRILL COLLARING HEAD 3/4" TD5310405 T-DRILL COLLARING HEAD 1" TD5310414 T-DRILL COLLARING HEAD 1 1/4" TD5310412 T-DRILL COLLARING HEAD 1 1/2" TD5310413 T-DRILL COLLARING HEAD 2"   Refigeration sizes also available Branch Puller / Branch Pulling Device

Read more less

Copper T-D Collaring Head 12 mm (1/2in) Collaring Heads Purchased Separately T-drill portable pipe branching system provides increased strength and improved flow characteristics when compared to standard tee fittings. It also increases profits due to fewer welded joints, no tee fitting costs and improved productivity.   Code Description Size TD5310400 T-DRILL COLLARING HEAD 1/2" TD5310464 T-DRILL COLLARING HEAD 3/4" TD5310405 T-DRILL COLLARING HEAD 1" TD5310414 T-DRILL COLLARING HEAD 1 1/4" TD5310412 T-DRILL COLLARING HEAD 1 1/2" TD5310413 T-DRILL COLLARING HEAD 2"   Refigeration sizes also available Branch Puller / Branch Pulling Device

Read more less

Copper T-D Collaring Head 10 mm (3/8in) Collaring Heads Purchased Separately T-drill portable pipe branching system provides increased strength and improved flow characteristics when compared to standard tee fittings. It also increases profits due to fewer welded joints, no tee fitting costs and improved productivity.   Code Description Size TD5310400 T-DRILL COLLARING HEAD 1/2" TD5310464 T-DRILL COLLARING HEAD 3/4" TD5310405 T-DRILL COLLARING HEAD 1" TD5310414 T-DRILL COLLARING HEAD 1 1/4" TD5310412 T-DRILL COLLARING HEAD 1 1/2" TD5310413 T-DRILL COLLARING HEAD 2"   Refigeration sizes also available Branch Puller / Branch Pulling Device

Read more less

Stainless Steel Collaring Head 48.3 (45-51mm) Collaring Heads Purchased Separately The T-DRILL T-60 is a portable, easy-to-use, low-noise collaring machine for stainless steel tube. It is an ideal solution for making reducing tee joints in main run tube.While giving you a comparable quality to commercial tee fittings, your profit will increase since T-60 eliminates two welded joints and fitting cost   Code Description Size TD5050111 S/STEEL Collaring Head 21.3 20 - 25mm TD5050116 S/STEEL Collaring Head 26.9 25 - 30mm TD5050121 S/STEEL Collaring Head 33.7 30 - 34mm TD5050126 S/STEEL Collaring Head 42.4 34 - 44mm TD5050129 S/STEEL Collaring Head 48.3 45 - 51mm   Branch Puller / Branch Pulling Device

Read more less

Stainless Steel Collaring Head 42.4 (34-44mm) Collaring Heads Purchased Separately The T-DRILL T-60 is a portable, easy-to-use, low-noise collaring machine for stainless steel tube. It is an ideal solution for making reducing tee joints in main run tube.While giving you a comparable quality to commercial tee fittings, your profit will increase since T-60 eliminates two welded joints and fitting cost   Code Description Size TD5050111 S/STEEL Collaring Head 21.3 20 - 25mm TD5050116 S/STEEL Collaring Head 26.9 25 - 30mm TD5050121 S/STEEL Collaring Head 33.7 30 - 34mm TD5050126 S/STEEL Collaring Head 42.4 34 - 44mm TD5050129 S/STEEL Collaring Head 48.3 45 - 51mm   Branch Puller / Branch Pulling Device

Read more less

Stainless Steel Collaring Head 33.7 (30-34mm) Collaring Heads Purchased Separately The T-DRILL T-60 is a portable, easy-to-use, low-noise collaring machine for stainless steel tube. It is an ideal solution for making reducing tee joints in main run tube.While giving you a comparable quality to commercial tee fittings, your profit will increase since T-60 eliminates two welded joints and fitting cost   Code Description Size TD5050111 S/STEEL Collaring Head 21.3 20 - 25mm TD5050116 S/STEEL Collaring Head 26.9 25 - 30mm TD5050121 S/STEEL Collaring Head 33.7 30 - 34mm TD5050126 S/STEEL Collaring Head 42.4 34 - 44mm TD5050129 S/STEEL Collaring Head 48.3 45 - 51mm   Branch Puller / Branch Pulling Device

Read more less

Stainless Steel Collaring Head 26.9 (25-30mm) Collaring Heads Purchased Separately The T-DRILL T-60 is a portable, easy-to-use, low-noise collaring machine for stainless steel tube. It is an ideal solution for making reducing tee joints in main run tube.While giving you a comparable quality to commercial tee fittings, your profit will increase since T-60 eliminates two welded joints and fitting cost   Code Description Size TD5050111 S/STEEL Collaring Head 21.3 20 - 25mm TD5050116 S/STEEL Collaring Head 26.9 25 - 30mm TD5050121 S/STEEL Collaring Head 33.7 30 - 34mm TD5050126 S/STEEL Collaring Head 42.4 34 - 44mm TD5050129 S/STEEL Collaring Head 48.3 45 - 51mm   Branch Puller / Branch Pulling Device

Read more less

Stainless Steel Collaring Head 21.3 (20-25mm) Collaring Heads Purchased Separately The T-DRILL T-60 is a portable, easy-to-use, low-noise collaring machine for stainless steel tube. It is an ideal solution for making reducing tee joints in main run tube.While giving you a comparable quality to commercial tee fittings, your profit will increase since T-60 eliminates two welded joints and fitting cost   Code Description Size TD5050111 S/STEEL Collaring Head 21.3 20 - 25mm TD5050116 S/STEEL Collaring Head 26.9 25 - 30mm TD5050121 S/STEEL Collaring Head 33.7 30 - 34mm TD5050126 S/STEEL Collaring Head 42.4 34 - 44mm TD5050129 S/STEEL Collaring Head 48.3 45 - 51mm   Branch Puller / Branch Pulling Device

Read more less

PLUS 115 CU Portable Collaring System for Copper tubes The PLUS 115 Copper Collaring System is an effortless, capacity expanding attachment for the heavy duty T-65 Portable Collaring Machine. It forms 54–115 mm (NS 2″–4″) outlets on copper tubes up to 206 mm (NS 8″) in just a few minutes. By eliminating two brazed joints, the system minimizes costs and increases profit while offering improved quality, comparable to mechanically formed tee joints. The ergonomically designed system minimizes the operator workload and is effortless to use. The powerful PLUS 115 SS is an ideal solution to be used both on the jobsite and in the fabrication shop.

Read more less

T-54c Cordless Portable Tee Forming Machine The revolutionary plumBOSS T-Drill is the only portable powered branch forming tool in the world. This tool forms branches in tubes for attaching other tubes, instead of using a t-piece. This powerful & innovative tool can pull branches in seconds, saving you hours of time soldering or press fitting in t-pieces. Using the t-drill means only one soldered joint, resulting in dramatically less chance for leaks and call backs. This kit includes heads that cut the pilot hole in the copper tube, then quickly use the innovative forming pins to create a perfect branch. There is no need to even heat the tube. The all new T-54c version uses the latest battery technology for a lightweight, easy to use machine that can form 40 54mm branches on one charge. Capacity of up to 54 mm (NS 2″) out of run tubes up to 108 mm (NS 4″) (with optional retrofit kit even up to 168.3 mm run tubes) Battery-operated for unparalleled portability Ideal for plumbing, HVAC, and special applications Compared to the installed cost of a tee fitting, the T-DRILL joint can improve your profit by up to 70% With the T-54c, you can experience superior quality that resembles commercial tee fittings. The T-54c is designed not only to match industry standards but also to enhance your profitability. By eliminating two brazed joints and associated fitting costs, this innovative solution ensures both efficiency and cost-effectiveness for your operations. Experience the power of the heavy-duty T-DRILL T-54c – a cordless, portable, easy-to-use, and low-noise tee forming machine crafted for professionals. Increase efficiency in your work with the T-Drill solution designed for effortlessly creating tee joints in main run tubes. Branch tubing outside diameter Run tube outside diameter mm 85/16" 103/8" 121/2" 155/8" 183/4" 227/8" 281 1/8" 351 3/8" 421 5/8" 542 1/8" 15mm(5/8") 0.8 1 1.2 1.2 - - - - - - 18mm(3/4") 0.8 1 1.2 1.5 1.2 - - - - - 22mm(7/8") 0.8 1 1.2 1.5 1.5 1.5 - - - - 28mm(1 1/8") 0.8 1 1.2 1.5 1.5 1.5 1.5 - - - 35mm(1 3/8") 0.8 1 1.2 1.5 1.5 1.5 1.5 1.5 - - 42mm(1 5/8") 0.8 1 1.2 1.5 1.5 1.5 1.5 2 2 - 54mm(2 1/8") 0.8 1 1.2 1.5 1.5 1.5 1.5 2 2 2 64mm(2 1/2") 0.8 1 1.2 1.5 1.5 1.5 1.5 2.5 2.5 2.5 76mm(3") 0.8 1 1.2 1.5 1.5 1.5 1.5 2.5 2.5 2.5 88.9mm(3 1/2") 0.8 1 1.2 1.5 1.5 1.5 1.5 2.5 2.5 2.5 108mm(4") 0.8 1 1.2 1.5 1.5 1.5 1.5 2.5 2.5 2.5 168.3mm With optional retrofit kit The T-Drill Process: Drilling of the pilot hole Extension of the forming pins Finished collar DO IT WITH T-DRILL: Cut costs - Improve quality - Increase profit No T-fittings No costly inventories No tube cutting Only one brazed joint Minimized inspection cost Tee ratio variation flexibility Smaller risk of leakage or call-backs Optimizes flow-characteristics

Read more less

T-54c Cordless Portable Tee Forming Machine The revolutionary plumBOSS T-Drill is the only portable powered branch forming tool in the world. This tool forms branches in tubes for attaching other tubes, instead of using a t-piece. This powerful & innovative tool can pull branches in seconds, saving you hours of time soldering or press fitting in t-pieces. Using the t-drill means only one soldered joint, resulting in dramatically less chance for leaks and call backs. This kit includes heads that cut the pilot hole in the copper tube, then quickly use the innovative forming pins to create a perfect branch. There is no need to even heat the tube. The all new T-54c version uses the latest battery technology for a lightweight, easy to use machine that can form 40 54mm branches on one charge. Capacity of up to 54 mm (NS 2″) out of run tubes up to 108 mm (NS 4″) (with optional retrofit kit even up to 168.3 mm run tubes) Battery-operated for unparalleled portability Ideal for plumbing, HVAC, and special applications Compared to the installed cost of a tee fitting, the T-DRILL joint can improve your profit by up to 70% With the T-54c, you can experience superior quality that resembles commercial tee fittings. The T-54c is designed not only to match industry standards but also to enhance your profitability. By eliminating two brazed joints and associated fitting costs, this innovative solution ensures both efficiency and cost-effectiveness for your operations. Experience the power of the heavy-duty T-DRILL T-54c – a cordless, portable, easy-to-use, and low-noise tee forming machine crafted for professionals. Increase efficiency in your work with the T-Drill solution designed for effortlessly creating tee joints in main run tubes. Branch tubing outside diameter Run tube outside diameter mm 85/16" 103/8" 121/2" 155/8" 183/4" 227/8" 281 1/8" 351 3/8" 421 5/8" 542 1/8" 15mm(5/8") 0.8 1 1.2 1.2 - - - - - - 18mm(3/4") 0.8 1 1.2 1.5 1.2 - - - - - 22mm(7/8") 0.8 1 1.2 1.5 1.5 1.5 - - - - 28mm(1 1/8") 0.8 1 1.2 1.5 1.5 1.5 1.5 - - - 35mm(1 3/8") 0.8 1 1.2 1.5 1.5 1.5 1.5 1.5 - - 42mm(1 5/8") 0.8 1 1.2 1.5 1.5 1.5 1.5 2 2 - 54mm(2 1/8") 0.8 1 1.2 1.5 1.5 1.5 1.5 2 2 2 64mm(2 1/2") 0.8 1 1.2 1.5 1.5 1.5 1.5 2.5 2.5 2.5 76mm(3") 0.8 1 1.2 1.5 1.5 1.5 1.5 2.5 2.5 2.5 88.9mm(3 1/2") 0.8 1 1.2 1.5 1.5 1.5 1.5 2.5 2.5 2.5 108mm(4") 0.8 1 1.2 1.5 1.5 1.5 1.5 2.5 2.5 2.5 168.3mm With optional retrofit kit The T-Drill Process: Drilling of the pilot hole Extension of the forming pins Finished collar DO IT WITH T-DRILL: Cut costs - Improve quality - Increase profit No T-fittings No costly inventories No tube cutting Only one brazed joint Minimized inspection cost Tee ratio variation flexibility Smaller risk of leakage or call-backs Optimizes flow-characteristics

Read more less